Media & Signage Towers

Quadra AV Furniture can design, manufacture and install all types of media towers.

Adaptive FW – floor to wall

The Adaptive FW (floor to wall) is a versatile solution for a large screen. A video conference shelf can be mounted to the front. The front lower panel below the screen is removable via 2x cylinder locks. Steel framework which is powder coated silver or black. The steel work can also be powder coated to any RAL colour at additional cost. Capacity for single screens from 40″ to 85″.

Easy access to video conferencing codec or other equipment.

Optional extras include a VC shelf.

Sizes do not include screens.

Product Code:

  • ADAPTIVE-FW-MEL
  • ADAPTIVE-FW-VEN

Adaptive single screen VC stand – free standing

The Adaptive FW (floor to wall) is a versatile solution for a large screen, you can add a shelf for a video conference camera to the front. The front lower panel below the screen is removable via 2x cylinder locks. Steel framework which is powder coated silver or black. The steel work can also be powder coated to any RAL colour you specify but may be a small charge applied. Single screens from 40″ to 85″. Clean, simple design without clutter. Easy access to video conferencing codec or other equipment. Hard-wearing powder coat steel work and front / back panels in either standard melamine, veneers, vinyl wraps / colours.

Optional extras include a VC shelf.

Sizes do not include screens.

Product Code:

  • ADAPTIVE-FS-SIN-MEL
  • ADAPTIVE-FS-SIN-VEN
  • Approximate size (mm)
  • Height 1800mm
  • Width 920mm
  • Length 195mm
  • Base 1200 x 500mm

Adaptive double screen VC stand – free standing

The Adaptive FW (floor to wall) is a versatile solution for a large screen, you can add a shelf for a video conference camera to the front. The front lower panel below the screen is removable via 2x cylinder locks. Steel framework which is powder coated silver or black. The steel work can also be powder coated to any RAL colour you specify but may be a small charge applied. Single screens from 40″ to 85″. Clean, simple design without clutter. Easy access to video conferencing codec or other equipment. Hard-wearing powder coat steel work and front / back panels in either standard melamine, veneers, vinyl wraps / colours.

Optional extras include a VC shelf.

Sizes do not include screens.

Product Code:

  • ADAPTIVE-FS-DOU-MEL
  • ADAPTIVE-FS-DOU-VEN
  • Approximate size (mm)
  • Height 1800mm
  • Width 920mm
  • Length 195mm
  • Base 1200 x 750mm

Adaptive table

The Adaptive table has all the benefits that the above single units have but with the added flexibility of a bespoke designed table to suite the shape of your room and as many people as required. 

Allows all cable routes to the screen to be hidden under the table top.

Ideal for where the screen is not fixed to the wall.

Other tables sizes and shapes are available upon request.

Chairs are not included, for chair options and pricing please see the chair section 

Pricing is for stand and table only, Screens, cables and connections via your integrator

Product Code:

  • ADAPTIVE-TBL6-MEL
  • ADAPTIVE-TBL6-VEN
  • Approximate size (mm)
  • Height 1800mm
  • Width 1600mm
  • Length 1600mm
  • Desk Height 730mm

Alliance tower 1

Alliance VC tower. The tower can have a 49” or 55” screen, there is also an adjustable Video Conference camera shelf.  The tower has a steel shield which is removable for service and makes for easy install.  The column has a rear removable panel for cable access.

The front has brush strip in the vertical for cables from the adjustable CVC camera. 

The base is a flat steel plate and there are fixing holes through the base inside the column. 

To the top is a bracket for fixing back to the wall if required depending on screen size and weight.

Product Code:

  • ALL-T1 (single 49-55” Screens)
  • Approximate size (mm)
  • Height 1846mm
  • Width 1340mm
  • Depth 500mm

Alliance tower 3

Alliance VC tower. The tower can have dual 49” or dual 55” screens mounted, there is also an adjustable Video Conference camera shelf.  The tower has a steel shield which is removable for service and makes for easy install.  The column has a rear removable panel for cable access.

The front has brush strip in the vertical for cables from the adjustable CVC camera.

The base is a flat steel plate and there are fixing holes through the base inside the column. 

To the top is a bracket for fixing back to the wall.

Product Code:

  • ALL-T3 (dual 49-55” Screens)
  • Approximate size (mm)
  • Height 1846mm
  • Width 2575mm
  • Depth 500mm

Laboratory Alliance tower

Alliance screen tower for laboratory’s. The tower can have a 49” or 55” screen mounted, to the front low level is a cutout for cables to run from the tower into the laboratory bench.

There are also fixing holes either side of the cut out for bolting to the bench.

The tower has a steel shield which is removable for service and makes for easy install.  The column has a rear removable panel for cable access. The front has brush strip in the vertical for cables from the adjustable CVC camera.  The base is a flat steel plate and there are fixing holes through the base inside the column. 

Product Code:

  • ALL-T-LAB (single 49-55” Screens)
  • Approximate size (mm)
  • Height 1846mm
  • Width 1340mm
  • Depth 500mm

Digi tower

Bespoke housing for digital signage or point-of-sale. Available in portrait format

A modern attractive design available to suit any size of screen.

Popular screen sizes are 42″ – 46″ and 65″ but smaller/larger sizes available.  Stable and rigid construction. Removable rear access panel with ventilation grills. Various fascia colours, melamine finishes for the base and rear frame. Vinyl wrap to the front fascia in any RAL colour. Fitted with glides/feet.

Product Code:

  • DIGI42P-MEL (portrait)
  • DIGI46P-MEL (portrait)
  • DIGI55P-MEL (portrait)
  • DIGI65P-MEL (portrait)

55″ Landscape digi tower

Bespoke housing for digital signage or point-of-sale. Available in landscape format

A modern attractive design available to suit any size of screen.

Popular screen sizes are 42″ – 46″ and 55″ but smaller/larger sizes available.  Stable and rigid construction. Removable rear access panel with ventilation grills. Various fascia colours, melamine finishes for the base and rear frame. Vinyl wrap to the front fascia in any RAL colour. Fitted with glides/feet.

Product Code:

  • DIGI55L-MEL (landscape)

Bespoke digi towers

Here at Quadra AV Furniture we can design a bespoke Digi tower for reception area or foyer. It can be a custom size, shape or finish.

The Digi tower below right features a coloured back ground behind the screen which can match your corporate branding. 

The Digi tower below left is a full circle with 3x screens so people coming into the foyer or reception can see a screen from any direction.

We can create any unit with a bespoke finish to specification whilst allowing for the integration of all audio visual components.

Product Code:

  • DIGI55L-MEL (landscape)
Scroll to Top